Monitoring and Configuring the Printer

snmp

Use the “snmp” command to display and edit SNMP configuration settings such as the community name.

View settings msh> snmp

Default access settings 1 is as follows: Community name:public

IPv4 address:0.0.0.0 IPv6 address:::

IPX address:00000000:000000000000 Access type:read-only

Effective Protocol:IPv4/IPv6/IPX

Default access settings 2 is as follows: Community name:admin

IPv4 address:0.0.0.0

 

 

 

 

IPv6 address:::

 

 

 

 

IPX address:00000000:000000000000

 

 

 

 

Access type:read-write

 

 

 

 

Effective Protocol:IPv4/IPv6/IPX

6

 

 

 

 

 

• If "-p" is added, you can view settings one by one.

 

 

 

 

 

 

• To display the current community, specify its registration number.

 

 

Display

 

 

 

 

msh> snmp ?

 

 

 

Community name configuration

 

 

 

msh> snmp “number” name “community_name”

 

 

 

You can configure ten SNMP access settings numbered 1-10.

 

 

 

The printer cannot be accessed from SmartDeviceMonitor for Admin or

 

 

 

 

SmartDeviceMonitor for Client if “public” is not registered in numbers 1-

 

 

 

 

10. When changing the community name, use SmartDeviceMonitor for

 

 

 

 

Admin and SNMP Setup Tool to correspond with printer settings.

 

 

 

The community name can be entered using up to 15 characters.

 

 

Deleting community name

 

 

 

msh> snmp “number” clear name

 

 

Access type configuration

 

 

 

msh> snmp “number” type “access_type”

 

 

 

 

 

 

 

 

 

 

Access type

Type of access permission

 

 

 

 

 

 

 

 

no

not accessible

 

 

 

 

 

 

 

 

read

read only

 

 

 

 

 

 

 

 

write

read and write

 

 

 

 

 

240

 

trap

user is notified of trapmessages