Using the SmartDeviceMonitor Port

M Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box be-

 

comes the IPP port name.

 

N Click [Detailed Settings] to make necessary settings.

1

 

For information about the settings, see SmartDeviceMonitor for Client Help.

O P Q
Click [OK].

Check that the port of the selected printer is displayed in [Port:].

Set a [User Code], if necessary.

Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.

R S

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].

Installation starts.

T After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Restart the computer to complete installation.

Note

Auto Run may not work with certain operating system settings. If this hap- pens, launch “Setup.exe” on the CD-ROM root directory.

This allows a SmartDeviceMonitor for Admin user to display and check the number of sheets each user prints. For details, see SmartDeviceMonitor for Admin Help.

To stop installation of the selected software, click [Cancel] before installa- tion is complete.

Reference

A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.61 “If a Message Appears during Installation”.

15