Ricoh 220-240 V Note, [OK], Click, [Login], [Login], PCONSOLE, ❖ To quit, [NetWare], Click [Login], [Configuration], [Login Password], F Click [Logout], [Login User Name]

Using a Printer Server

P Assign print queues to the created printer.

Q From [Print Server Configuration Menu], select [Queues Serviced By Printer]. R Select the printer created.

S Press the {Insert} key to select a queue serviced by the printer.

You can select several queues.

T Follow the instructions on the screen to make other necessary settings.

Following these steps, check that the queues are assigned.

U Press the {Esc} key until “Exit?” appears, and then select [Yes] to exitPCONSOLE.

V Start the print server by entering the following from the console of the Net- Ware server.

If the print server is in operation, quit and restart it.

❖ To quit

CAREE: unload pserver ❖ To start

7

CAREE: load pserver “print_server_name”

Note

❒If the printer works as configured, the message “Waiting for job” appears.

Setting up using Web Image Monitor

A B

C

Start Web Image Monitor.

Click [Login].

A dialog box for entering the [Login User Name] and [Login Password] appears.

Enter the login user name and password, and then click [Login].

For details about the login name and password, consult your network admin- istrator.

D E

Click [Configuration] in the left area, and then click [NetWare].

Confirm the settings, and then click [OK].

Configuration is now complete. Wait several minutes before restarting Web Image Monitor.

F Click [Logout].

284