Using the LPR Port

Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003)

Important

1

❒Installing this printer driver requires Administrators permission. Log on us- ing an account that has Administrators permission.

❒In an IPv6 environment, you cannot use the LPR Port. Use the SmartDevice- Monitor port.

A Quit all applications currently running.

B Insert the CD-ROM into the CD-ROM drive.

The installer starts.

C Select an interface language, and then click [OK].

The default interface language is English.

D Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

E Select [My Computer], and then click [Next >].

F Click [Local Printer attached to this computer.], and then click [Next >]. G Click [Create a new port:].

H Click [LPR Port] in [Create a new Port], and then click [Next >].

I Enter the printer's IP address in the [Name or address of server providing lpd] box.

J Enter “lp” in the [Name of printer or print queue on that server box], and then click [OK].

K Check that the name of the printer whose driver you want to install is se- lected, and then click [Next >].

L Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

M Click [Next >].

N Specify whether or not to print a test page, and then click [Next >]. O Click [Finish].

The printer driver installation starts.

39