Using NetWare

Using NetWare

This section describes the setting procedure for network printers in the NetWare environment. In the NetWare environment, you can connect the printer as a “print server” or “remote printer”.

Important

IPv6 cannot be used on this function.

Setting procedure

When using the printer as a print server

A Installing SmartDeviceMonitor for Admin B Setting the network interface board.

C Turning the printer off and then back on.

When using the printer as a remote printer A Installing SmartDeviceMonitor for Admin. B Setting the network interface board.

C Setting NetWare.

D Starting the print server.

Note

 

This procedure assumes an environment is already prepared for normal Net-

7

Ware running the printing service setting.

The procedure is explained with the following example settings:

File server’s name …CAREE

Print server’s name …PSERV

Printer’s name …R-PRN

Queue name …R-QUEUE

Using SmartDeviceMonitor for Admin

To use the printer in a NetWare environment, use SmartDeviceMonitor for Admin to set the NetWare printing environment.

Note

The NetWare Client provided by Novell is required to set the printing environ- ment using SmartDeviceMonitor for Admin under the following environments:

NDS mode in Windows 95/98/Me

NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0

Reference

For details about installing SmartDeviceMonitor for Admin, see p.201 “In- stalling SmartDeviceMonitor for Admin”.

Printers listed by SmartDeviceMonitor for Admin

SmartDeviceMonitor for Admin lists printers connected to the network. If you cannot identify the printer you want to configure, print configuration

page, and then check the printer name.

277