Remote Maintenance by telnet

bonjour(rendezvous)

Usethe“bonjour(rendezvous)”commandtodisplaybonjour(rendezvous)-relatedsettings.

View settings

Bonjour settings are displayed. msh> bonjour

Bonjour service name setting

You can specify the bonjour service name. msh> bonjour cname “computer name”

The computer name can be entered using up to 63 alphanumeric characters.

Bonjour Installation location information setting

You can enter information about the location where the printer is installed. msh> bonjour location “location”

Information about location can be entered using up to 32 alphanumeric characters.

Setting order of priority for each protocol

diprint

msh> bonjour diprint [0–99]

lpr

msh> bonjour lpr [0–99]

6

• ipp

msh> bonjour ipp [0–99]

You can specify the order of priority for “diprint”, “lpr”, and “ipp”. Smaller numbers indicate higher priority.

IP TTL setting

msh> bonjour ip ttl {1-255}

You can specify the IP TTL (the number of routers a packet can pass through).

Note

The default is 255.

Resetting the computer name and location information

You can reset the computer name and location information. msh> bonjour clear {cname location}

• cname

Reset the computer name. The default computer name will be displayed when the computer is restarted.

• location

Reset the location information. The previous location information will be deleted.

Interface configurationmsh> bonjour linklocal “interface_name”

• If many types of interface are installed, configure the interface that com- municates with linklocal address.

• If you do not specify an interface, the Ethernet interface is automatically selected.

• wlan can be specified only when the IEEE 802.11b interface is installed.

Interface

Interface configured

 

 

 

 

ether

Ethernet interface

 

 

 

 

wlan

IEEE 802.11b interface

225