Monitoring and Configuring the Printer

access

Use the “access” command to view and configure access control. You can also specify two or more access ranges.

❖View settings msh> access

❖IPv4 Configurationmsh> access [⋅] range “start-address end-address”

• [⋅] represents a target number between 1 and 5. (Up to five access ranges

can be registered and selected.)

Example: to specify accessible IPv4 addresses between 192.168.0.10 and 192.168.0.20:

msh> access 1 range6 192.168.0.10 192.168.0.20

❖IPv4 Configuration

msh> access [⋅] range “start-address end-address”

• [⋅] represents a target number between 1 and 5. (Up to five access ranges

6 can be registered and selected.)

Example: to specify accessible IPv4 addresses between 192.168.0.10 and 192.168.0.20:

msh> access 1 range6❖IPv6 Configurationmsh> access [⋅] range6 “start-address end-address”

• [⋅] represents a target number between 1 and 5. (Up to five access ranges

can be registered and selected.)

Example: to specify accessible IPv6 addresses between 2001:DB8::100 and 2001:DB8::200.

msh> access 1 range6 2001:DB8::100 2001:DB8::200❖IPv6 access mask Configurationmsh> access [⋅] mask6 “base-address prefixlen”

• [⋅] represents a target number between 1 and 5. (Up to five access ranges

can be registered and selected.)

Example: to specify accessible IPv6 addresses to 2001:DB8::/32

msh> access 1 mask6 2001:DB8:: 32

❖Access control initialization msh> access flush

•Use the “flush” command to restore the default settings so that all access ranges become “0.0.0.0” for IPv4, and “::” for IPv6.

222