Monitoring and Configuring the Printer

 

 

Message

Problem and solutions

 

 

 

 

 

 

DHCP server not found.

The DHCP server was not found. Make sure

 

 

 

that the DHCP is on the network.

 

 

 

 

 

 

dhcpcd start.

The DHCPCD service (dhcp client service) has

 

 

 

started.

 

 

 

 

 

 

dpsd is disabled.

Communication via PictBridge is unavailable

 

 

 

because PictBridge is disabled in the security

 

 

 

mode. Enable PictBridge in the security mode.

 

 

 

 

 

 

Duplicate IP=<IP address>(from<MAC ad-

The same IP address (IPv4, or IPv6 address)

 

 

dress>).

was used. Each IP address (IPv4, or IPv6 ad-

 

 

 

dress) must be unique. Check the address of

 

 

 

the device indicated in [MAC address].

 

 

 

 

 

 

Established SPX Connection with PServer,

(In the remote printer mode) Connection to the

 

 

(RPSocket=<socketnumber>, connID=<con-

print server has been established.

 

 

nection ID>)

 

 

 

 

 

 

 

exiting

The lpd service has ended and the system is

 

 

 

exiting the process.

 

 

 

 

 

 

Exit pserver

(In the print server mode) The print server

 

 

 

function is disabled because the necessary

 

 

 

print server settings have not been made.

6

 

 

 

 

 

 

Frametype =<frame typename>

The frame type name is configured to be used

 

 

 

 

 

on NetWare.

 

 

 

 

 

 

httpd start.

The httpd service has started.

 

 

 

 

 

 

IEEE 802.11b <communication mode> mode

Displays IEEE 802.11b communication mode.

 

 

 

 

 

 

inetd start.

The inetd service has started.

 

 

 

 

 

 

Interface (interface name): Duplicate IP Ad-

The same IP (IPv4 or IPv6) address was used.

 

 

dress (IP address).

Each IP address must be unique. Check the ad-

 

 

 

dress of the device indicated in [IP address].

 

 

 

 

 

 

< Interface > started with IP: < IP address >

IP address (IPv4, or IPv4 address) has been set

 

 

 

for the interface and is operating.

 

 

 

 

 

 

< Interface >: Subnet overlap.

The same IP address (IPv, orIPv6 address) and

 

 

 

the subnet mask is used with other device.

 

 

 

 

 

 

IPP cancel-job: permission denied.

The printer could not authenticate the name of

 

 

 

the user attempting to cancel a job.

 

 

 

 

 

 

IPP job canceled. jobid=%d.

The spooled job was canceled due to error or

 

 

 

user request.

 

 

 

 

 

 

LeaseTime=<lease time>(sec), Renew-

The resource lease time received from the

 

 

Time=<renewtime>(sec).

DHCP server is displayed in [lease time] in

 

 

 

seconds. The renewal time is displayed in [re-

 

 

 

new time] in seconds.

 

 

 

 

 

 

Login to fileserver <file server name>

(In the print server mode)Login to the file serv-

 

 

(<IPXIPv4IPv6>,<NDSBINDERY>)

er is in the NDS or BINDERY mode.

 

 

 

 

 

 

Memory allocate error.

Data cannot be obtained.

 

 

 

Disconnect the USB cable, and then connect it.

 

 

 

 

270