Monitoring and Configuring the Printer

A On the [System] menu, set [Notify by Email] to [On] using the control panel.

The default is [On].

B Open a Web browser, and then enter “http://(printer's address)/” in the address bar.

Top Page of Web Image Monitor appears.

When setting SSL, a protocol for encrypted communication, under environment which server authentification is issued , enter “https://(printer's address)/”.

C Click [Login] on Top Page of Web Image Monitor.

The window for entering the login user name and password appears.

D Enter the user name and password, and then click [OK].

For details about the login user name and password, consult your network administrator.

E

F

6G

In the menu area, click [Configuration].

Click [Device Settings], and then click [E-mail].

Make the following settings:

Items in the Reception column: Make the necessary settings for sending and receiving e-mail.

Items in the SMTP column: Configure the SMTP server. Check your mail- ing environment, and then specify the necessary items. You can also per- form mail authentication for the SMTP server.

Items in the POP before SMTP column: Configure the POP server. Check your mailing environment, and then specify the necessary items. You can also perform mail authentication for the POP server.

Items in the POP3/IMAP4 column: Configure the POP3 or IMAP4 server. Check your mailing environment, and then specify the necessary items.

Items in the E-mail Reception Port column: Configure the port to be used for access to the mail server.

Items in the E-Mail Notification Account column: Specify these items if you want to use on-demand e-mail notification.

H Click [OK].

Reference

For details, see p.167 “System Menu”.

216