Using as the Windows Network Printer

Installing the PostScript 3 Printer Driver (Windows 95/98/Me)

Important

1

If you print from a print server connected to the printer using the SmartDevice-

Monitor port, the client cannot use Recovery Printing and Parallel Printing.

 

A Quit all applications currently running.

B Insert the CD-ROM into the CD-ROM drive.

The installer starts.

C Select an interface language, and then click [OK].

The default interface language is English.

D Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

E Click [Next >].

F Click [Network Printer], and then click [Next >].G Click [Browse].

H Double-click the computer name you want to use as a print server in the [Browse for Printer] window.

I Select the printer you want to use, and then click [OK].

J Check the location of the selected printer is shown, and then click [Next >]. K Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

L Specify whether or not to print a test page, and then click [Finish]. M Restart the computer.

Note

Auto Run may not work with certain operating system settings. If this hap- pens, launch “Setup.exe” on the CD-ROM root directory.

The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.

A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.

43