Ricoh 220-240 V ❖ PS Menu, Resolution, ❖Resolution, ❖Resolution, ❖Data Format, ❖Append CR to LF

Print Settings Menu

❖Append CR to LF

You can specify whether or not to append a CR code to each LF code to print text data clearly.

•Off

•On

Note

❒Default: Off

❖Resolution

You can specify the print resolution in dots per inch.

• 300 dpi

• 600 dpi

Note

❒Default: 600 dpi

❖ PS Menu 5

You can set conditions when using Postscript for printing.

❖Data Format

You can select the data format.

•Binary

•TBCP

This setting is effective when using a parallel, USB, or EtherTalk connec- tion.

When you use a parallel or USB connection, the print job is canceled if binary data is sent from the printer driver.

When you use an Ethernet connection, the print job is canceled if:

•The printer driver data format is TBCP and the data format selected us- ing the control panel is Binary Data.

•The printer driver data format is binary and the data format selected us- ing the control panel is TBCP.

Note

❒Default: TBCP

❖Resolution

You can select the resolution.

• 600dpi Fast

• 600dpi Standard

• 1200dpi

Note

❒Default: 600dpi Fast

177