Special Operations under Windows

lpr❖When specifying a printer by IP address

c:> lpr -Sprinter's IP address [-Poption] [-ol] \pass name\file name

❖When using a host name instead of an IP address

c:> lpr -Sprinter's host name [-Poption] [-ol] \pass name\file name

When printing a binary file, add the “-ol” option (lowercase O, and lowercase L).

When using a printer with the host name “host” to print a PostScript file named “file 1” located in the “C:\PRINT” directory, the command line is as follows:

c:> lpr -Shost -Pfiletype=RPS -ol C:\PRINT\file1rcp

First, register the printer's host name in the hosts file.

c:> rcp [-b] \pass name\file name [pass name\file name...] printer's host name:[option]

Note

❒In file names, “*” and “?” can be used as wild cards.

❒When printing a binary file, add the “-b” option.

When using a printer with the host name “host” to print a PostScript file named “file 1” or “file 2” located in the “C:\PRINT” directory, the command line is as follows:

c:> rcp -b C:\PRINT\file1 C:\PRINT\file2 host:filetype=RPS8 Reference

For details about registering the printer's host name in the hosts file, see p.288 “Using a Host Name Instead of an IPv4 Address”.

ftp

Use the “put” or “mput” command according to the number of files to be printed.

❖When one file is printedftp> put \pass name\file name [option]❖When multiple files are printedftp> mput \pass name\file name [\pass name\file name...] [option]

A Formulate the printer's IP address or the host name of the hosts file printer as an argument and use the “ftp” command.

% ftp printer's IP addressB Enter the user name and password, and then press the {OK} key.

For details about the user name and password, consult your network administrator.

User:290Password: