Manuals / Brands / Computer Equipment / Printer / Ricoh / Computer Equipment / Printer

Ricoh AP610N Tray, Menu:, Paper Input, Tray Paper Size:, Note, Menu, [Menu], # Enter, # Enter, # Enter, Important, [Paper Input], [Tray Paper Size]

1 96

Download 96 pages, 3.18 Mb

Paper and Other Media

I Lift the front side of the tray, and then place it into the printer. Carefully slide it into the printer until it stops.

1

ZKGY150E

Important

❒Do not slide the paper tray in with force. If you do, the front and side guides might move.

J Attach the paper tray cover provided when you have pulled out the tray extension.

ZKGH240E

Note

❒The paper tray cover contains four mounting holes.

•Use the two outer holes when attaching the paper tray cov- er as a cover for the standard tray.

•Use the two inner holes when attaching the paper tray cov- er as a cover for an additional tray.

If you load a paper size that is not selected automatically

To load paper whose size cannot be selected automatically, set the paper size on the control panel. Follow the procedure described below to set the paper size.

A Press the {Menu} key.

AGN503S

The [Menu] screen appears on the display.

B Press the {U} or {T} key to display [Paper Input], and then press the {# Enter} key.

Menu:Paper Input

The paper selection menu appears.

C Press the {U} or {T} key to display [Tray Paper Size], and then press the {# Enter} key.

The paper tray selection menu ap- pears.

D Press the {U} or {T} key to display the target paper tray, and then press the {# Enter} key.

Tray Paper Size:Tray 2

The paper size selection menu ap- pears.

16

Contents

Maintenance Guide 1Paper and Other Media 2Replacing Consumables and Maintenance Kit 3Cleaning the Printer 4Adjusting the Printer Page TABLE OF CONTENTS 6. Removing Misfed Paper Removing Misfed Paper When “Remove Misfeed Paper Tray” Appears When “Remove Misfeed Internal Path” Appears When “Remove Misfeed Paper Exit Cover” Appears 7. Appendix Trademarks How to Read This Manual 1. Paper and Other Media Paper and Other Media Supported by This Printer ❖Input Paper Sizes (Metric version) See p.19 “Loading Paper in the Bypass Tray” See p.24 “Loading Envelopes” ❖Input Paper Sizes (Inch version) Page ❖Paper weight and number of sheets to be set ❖Paper size not supported by both side printing Paper Recommendations Loading Paper Storing Paper Types of Paper and Other Media Plain Paper Thick Paper OHP transparencies Envelopes Paper not supported by this printer Print Area ❖Paper ❖Envelope Loading Paper Loading Paper in Tray 1 and the optional paper feed unit Changing the paper size D Slide the catches inwards to unlock the tray G Adjust the rear and side guides to the paper size you want to load E Slide the tray until it stops F Return the catches to their original positions H Load paper into the tray with the print side down Menu: Paper Input [Tray Paper Size] Tray Paper Size: Tray Tray 2: 8 1/2 x F Press the {Online} key Specifying custom size paper for the optional paper feed unit 1 Custom Size: Horiz. 210.0 mm Custom Size: Vert. 297.0 mm H Press the {Online} key Loading Paper in the Bypass Tray Specifying standard size paper for the Bypass Tray Bypass Size: *A4 (210 x 297) G Press the {Online} key Bypass Tray Page Loading Envelopes Loading envelopes into the Envelope Feeder Unit D Push the bottom plate down until it locks into place G Pinch the rear guide, and then slide it along the edge of the envelope stack I Press the {Menu} key M Press the {U} or {T} key to select the envelope type you want to use N Press the {# Enter} key to apply the settings. Wait for a while O Press the {Online} key Switching between Paper Trays 2.Replacing Consumables and Maintenance Kit Replacing the Toner Cartridge A Open the front cover by pushing the front cover release button B Be sure to put the toner cartridge on a stable, flat surface D Take the new toner cartridge from the box G Push down the toner cartridge to settle it in appropriate position H Close the front cover by pressing the left and right side indenta- tions Replacing the Maintenance Kit Before Replacing Replacing the Friction Pad G Push the friction pad until it locks securely F Insert the new friction pad in the paper tray Replacing the Transfer Roller H Take the gloves off J Lower the toner cartridge when it touches the back K Close the front cover by pressing the left and right side indenta- tions Replacing the Paper Feed Rollers G Reinstall the optional duplex unit if it was removed Replacing the Fusing Unit Replacing the fusing unit Replacing the fusing unit with the duplex unit attached Page H Print a configuration page to confirm that the printer works prop- erly 3. Cleaning the Printer Cautions to Take When Cleaning Cleaning the Friction Pad Cleaning the Paper Feed Roller Page Cleaning the Registration Roller G Close the front cover by pressing the left and right side indenta- tions F Lower the toner cartridge when it touches the back 4. Adjusting the Printer Adjusting the Image Density Adjusting Tray Registration I Press the {U}or {T}key to set the digit of the registration value (mm) J K Press the {# Enter} key Press the {Escape} key Registration: Adjustment Page 5. Troubleshooting Error & Status Messages on the Control Panel ❖Messages (in alphabetical order) Page Page Page Page Page Printer Does Not Print terface cable ❖ Network Connection ❖ Ad hoc Mode or 802.11 Ad hoc Mode ❖ Infrastructure Mode Page Checking the port connection Windows 95/98/Me Windows Windows XP Home Edition Windows NT Other Printing Problems Page If the problem cannot be solved, contact your sales or service representative Additional Troubleshooting Page Page 6. Removing Misfed Paper Removing Misfed Paper When “Remove Misfeed Paper Tray” Appears When “Remove Misfeed Internal Path” Appears F Close the front cover by pressing the left and right side indenta- tions When “Remove Misfeed Paper Exit Cover” Appears Removing misfed paper from the exit cover Removing misfed paper from the fusing unit Page When “Remove Misfeed Duplex Unit” Appears Removing the misfed paper inside the cover Removing misfed paper inside the duplex unit Page 7. Appendix Moving and Transporting the Printer Moving the Printer Moving the printer in the short distance Consumables Toner Cartridge Maintenance Kit ❖Maintenance Kit Type Specifications Mainframe ❖Configuration: ❖Print Process: ❖First Print Speed: ❖Paper size: ❖Paper Weight: ❖Media Type: ❖Power Source: ❖Power Consumption: ❖Weight: ❖Warm-upTime: ❖Paper Capacity: ❖Paper Output Capacity: ❖Memory: Options Paper Feed Unit Type ❖Dimensions (W⋅D⋅H): ❖Paper Size: Envelope Feeder Type Memory Unit Type C 256MB ❖Module Type: ❖Memory Type: ❖Number of Pins: 1394 Interface Unit Type 802.11b Interface Unit Type F ❖Protocol: ❖Data Transfer Speed: ❖Frequency Range: ❖Transmittable Distance: INDEX Page Page RICOH COMPANY, LTD