Troubleshooting

 

 

Messages/Second

Description

Solution

 

 

messages

 

 

 

 

 

 

 

 

 

HDD not Installed

You cannot print the sample

Install the Hard Disk Drive.

 

 

 

print and the locked print jobs,

See “Attaching Hard Disk Drive Type

 

 

 

because the optional Hard Disk

2600”, Setup Guide.

 

 

 

Drive is not installed.

 

 

 

 

 

 

 

 

Hex Dump Mode

The printer is in Hex Dump Mode.

No action required.

 

 

 

 

 

 

 

Invalid Data

The printer has received irreg-

Turn the power off, and then on. If the

 

 

Power Off On

ular data.

message appears again, contact your

 

 

 

sales or service representative.

 

 

 

 

 

 

 

 

 

 

 

Invalid Password

The password entered using

Enter the correct password using the

 

 

Try again

the control panel is not correct.

control panel.

 

 

 

 

 

 

 

 

 

 

 

Load Correct

The paper size setting on the

Load { paper size } paper of the select-

 

 

Size Paper

tray differs from that of actual

ed feed direction and paper size into

 

 

paper size in the tray.

the tray. Printing will not automati-

 

 

/ Press #

 

 

 

cally resume if the paper size and di-

 

 

to continue

 

 

 

 

rection setting is incorrect. Make sure

5

 

 

 

 

that the paper feed directions set in

 

 

 

 

the printer driver and on the control

 

 

 

 

panel are the same. There are two

 

 

 

 

methods to resume printing.

 

 

 

 

A Use the control panel to set the cor-

 

 

 

 

rect paper size and direction of the

 

 

 

 

paper in tray. Then Press the {# En-

 

 

 

 

ter} key .

 

 

 

 

B Press {Form Feed} and select the

 

 

 

 

tray with the control panel.

 

 

 

 

 

 

 

Load Paper

The paper type and size set-

Load paper into the tray indicated,

 

 

or Form Feed

tings for this tray do not match

then press the {# Enter}key to resume

 

 

/ Paper Size:

the size and type of paper actu-

printing. Or press {Form Feed}and se-

 

 

ally loaded.

lect the tray that holds a different type

 

 

Paper Type:

 

 

 

of paper. To cancel printing, press {Job

 

 

 

 

Reset}. Then Press the {# Enter}key .

 

 

 

 

 

 

 

Load Paper:Tray #

There is no paper left in this

Load paper into the tray indicated.

 

 

or Form Feed

tray.

 

 

 

 

 

 

 

/ Paper Size:

#: tray number

 

 

 

 

 

 

 

Paper Type:

 

 

 

 

 

 

 

 

 

Menu Protected

The menu is protected and the

Wait for two seconds until the previ-

 

 

Cannot change

settings cannot be changed.

ous display appears.

 

 

 

 

 

 

 

 

 

 

 

No Files exist

There are no files available for

Wait for two seconds until the previ-

 

 

 

the sample print job or the

ous display appears.

 

 

 

locked print job.

 

 

 

 

 

 

 

 

Offline

The printer is offline and can-

Press {Online} key.

 

 

 

not print data.

 

 

 

 

 

 

56