Cleaning the Printer

Cleaning the Friction Pad

If the friction pad is dirty, a multi- feed or a misfeed might occur. In this case, clean the pad as follows:

A Lift the paper tray slightly, and then pull it out until it stops. Lift the front side of the tray, and then pull it out of the printer.

3

ZKGY140E

B Place the tray on a flat surface. When there is paper in the tray, remove paper.

C Wipe the brown part of the friction pad with a soft damp cloth. Then, wipe it with a dry cloth to remove the water.

D Load paper into the paper tray with the print side up. Carefully slide the paper tray into the printer until it stops.

ZKGY150E

Important

❒Do not slide the paper tray in with force. If you do, the front and side guides might move.

Note

❒If misfeeds or multi-feeds of pa- per occur after cleaning the fric- tion pad, contact your sales or service representative.

❒Follow the same procedure to clean the friction pad of the op- tional paper feed unit and the envelope feeder unit.

TS3Y250E

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

44