Loading Paper
C Set the envelope size and feed di- rection. Press the {Menu} key.
AGN503S
The [Menu] screen appears on the display.
D Press the {U} or {T} key to display [Paper Input], and then press the {# Enter} key.
Menu:
Paper Input
The paper selection menu appears.
E Check [Bypass Size] appears, and then press the {# Enter} key.
The paper size selection menu ap- pears.
F Press the {U} or {T} key to select the envelope type you want to use.
Bypass Size:C5 Env(162x229)
Reference
For information about types of envelopes you can select, see p.3 “Paper and Other Media Supported by This Printer”.
G Press the {# Enter} key to apply the settings. Wait for a while.
After about two seconds, the display returns to the menu.
H Press the {Online} key.
The initial screen appears.
Loading envelopes into the Envelope Feeder Unit
Important
❒With the optional envelope feeder unit, you can load up to 60 enve- lopes at the same time. For more information about envelopes, see p.10 “Envelopes”.
The following explanation uses the example of installing the envelope feeder unit in “Tray 2”.
A Slide the optional paper feed unit (Tray 2) out until it stops. Then, lift it slightly, and then slide it out.
ZKGP330E
Note
❒Keep the paper tray with paper in a cool and dry place.
B Prepare the envelope feeder Unit.
C Pinch the side guides, and then slide them outward until they stop. Pinch the rear guide, and then slide it toward the back.
ZKGY260E
1
25