Ricoh AP610N When “Remove Misfeed Paper Exit Cover” Appears, Removing misfed paper from the exit cover, B Remove the misfed paper, A Open the paper exit cover

When “Remove Misfeed Paper Exit Cover” Appears

When “Remove Misfeed Paper Exit Cover” Appears

RCAUTION:

•When removing misfed paper, do not touch the fusing section because it becomes very hot.

•The fusing unit becomes very hot. When installing the new fus- ing unit, turn off the printer and wait about an hour. After that, in- stall the new fusing unit. Not waiting for the unit to cool down can result in a burn.

Important

❒Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer. This might cause a misfeed and damage the printer.

Removing misfed paper from the exit cover

A Open the paper exit cover.

	ZKGY391E
B Remove the misfed paper.	6

ZKGY380E

C Close the paper exit cover until it clicks.

ZKGY400E

73