
Replacing the Maintenance Kit
Replacing the Paper Feed Rollers
Replace all feed rollers including the printer and the optional paper feed unit(s). The following procedure shows how to replace the printer's paper feed rollers.
RCAUTION:
•When lifting the machine, use the inset grips on both sides. Otherwise the printer could break or cause injury if dropped.
RCAUTION:
•Lifting the paper feed unit care- lessly or dropping it may cause injury.
Important
❒The following are examples of re- placing the paper feed roller on the paper tray.
❒You can replace the paper feed roller on the optional paper feed unit by following the procedures below. The paper feed roller on the optional paper feed unit differs from the one on the paper tray. Confirm the type of paper feed roller you are installing.
2
AGN021S
Important
❒Always move the printer hori- zontally. Moving the printer facing up on down may cause the toner to scatter.
❒Do not put the printer on an un- stable or tilted surface.
Note
❒If the printer is equipped with the optional paper feed unit, do not move the printer and the unit together, because they are not securely attached.
C Slide the green lock lever to the left (), and then remove the paper feed roller (
).
AGN017S
A For the paper tray
B For the paper feed unit
ZKGM120E
37