Error & Status Messages on the Control Panel

 

 

 

 

Messages/Second

Description

 

Solution

messages

 

 

 

 

 

 

 

P= XX I= XXXXXXXX

A controller error. The SC

 

Turn the power off, and then on. If the

Power Off On

number indicates the problem.

 

message appears again, call your sales

 

 

or service representative.

/ If Error Reoccur

 

 

 

 

 

Call Service

 

 

 

 

 

 

 

Processing...

Print data is being processed.

 

Wait a while.

 

 

 

 

RC Gate

Cannot communicate with RC

 

Check the device or the RC Gate net-

connection error

Gate.

 

work connection.

 

 

 

 

 

 

 

Ready

The default ready message. The

 

No action required.

 

printer is ready to use.

 

 

 

 

 

 

Remove Misfeed

There is misfeed in the Duplex

 

Remove the misfed paper.

Duplex Unit

Unit.

 

See p.76 “When “Remove Misfeed

 

 

/ Open Duplex

 

 

Duplex Unit” Appears”.

 

 

 

Unit Cover

 

 

 

 

 

 

 

Remove Misfeed

There is a misfeed in the printer.

 

Remove the misfed paper.

Internal Path

 

 

See p.71 “When “Remove Misfeed In-

/ Open

 

 

ternal Path” Appears”.

 

 

 

Front Cover

 

 

 

 

 

 

 

Remove Misfeed

There is a misfeed in the paper

 

Remove the misfed paper.

Paper Exit Cover

exit cover.

 

See p.73 “When “Remove Misfeed Pa-

 

 

/ Open Paper

 

 

per Exit Cover” Appears”.

 

 

 

Exit Cover

 

 

 

 

 

 

 

Remove Misfeed

Paper is jammed in the speci-

 

Remove the misfed paper.

Paper Tray

fied input paper tray.

 

See p.70 “When “Remove Misfeed Pa-

 

 

/ Pull out Tray

 

 

per Tray” Appears”.

 

 

 

 

 

 

 

Remove Paper

The standard tray is full, and

 

Remove paper from the standard tray,

Standard Tray

the print job is suspended.

 

and the print job will be resumed au-

 

 

tomatically.

 

 

 

 

 

 

 

Replace

It is time to replace the mainte-

 

Replace the new maintenance kit.

Maintenance Kit

nance kit (friction pad, paper

 

See p.32 “Replacing the Maintenance

feed roller, transfer roller and

 

 

 

Kit”.

 

fusing Unit).

 

 

 

 

 

 

 

 

Replace

The toner cartridge is not set

 

Set the toner cartridge correctly.

Toner Cartridge

correctly or toner is almost run

 

See p.29 “Replacing the Toner Car-

 

out.

 

tridge”.

 

 

 

 

 

 

 

 

The toner dust is full.

 

Prepare a new toner cartridge. If the

 

 

 

image density gets too light, replace

 

 

 

the toner cartridge with a new one.

 

 

 

See p.29 “Replacing the Toner Car-

 

 

 

tridge”.

 

 

 

 

Reset Duplex

A communication error sent

 

Set the duplex unit correctly. If the

Unit correctly

from the system unit to the du-

 

problem persists, call your service

plex unit.

 

provider.

 

 

 

 

 

 

5

57