Loading Paper

D Press the {U} or {T} key to display [Paper Input], and then press the {# Enter} key.

Menu:

Paper Input

The paper selection menu appears.

E Check [Bypass Size] appears, and then press the {# Enter} key.

The paper size selection menu ap- pears.

F Press the {U} or {T} key to display the size and orientation of the paper in the bypass tray.

Bypass Size: *A4 (210 x 297)

After about two seconds, the display returns to the menu.

G Press the {Online} key.

The initial screen appears.

Note

1

❒ To load thick paper, OHP trans-

parencies, or envelopes, make settings for thick paper or OHP transparencies using the control panel and printer driver.

❒The number of pages that can be loaded in the bypass tray differs depending on paper type. Make sure paper is not stacked above the paper guides inside the by- pass tray.

Reference

For details about control panel settings for custom size paper or special paper, see p.22 “Specify- ing custom size paper for the Bypass Tray”.

For control panel settings when using thick paper, OHP trans- parencies, or post cards, see p.23 “Specifying a paper type for the Bypass Tray”.

21