Ricoh AP610N Removing misfed paper inside the duplex unit, printer until it is connected, C Align the power cable with the, aligning the rails inside of the

When “Remove Misfeed Duplex Unit” Appears

F Close the cover of the duplex unit.

B Lift the guide board inside the duplex unit, and then remove the misfed paper.

ZKGY360E

Removing misfed paper inside the duplex unit

A Push down the lever on the right side of the duplex unit (), and then pull it out until it stops ().

ZKGY440E

Important

❒When A5Lpaper misfeeds, you might not be able to remove it by

pulling the duplex unit out. In
this case, pull the paper tray out,
and then remove the paper.
	6
C Align the power cable with the
groove of the left slide of the du-
plex unit, and then insert the du-
plex unit into back of the printer
aligning the rails inside of the
printer until it is connected.

ZKGX320E

ZKGX240E

Reference

If the error message appears again, the misfed paper might be left in the printer. Confirm that any torn paper scraps are not in the inside of the printer. For more information, see p.71 “When “Remove Misfeed Internal Path” Appears”.

77