Paper and Other Media

Specifying standard size paper for the Bypass Tray

1Important

❒Shuffle the paper before loading the stack onto the tray, so multiple sheets are not fed in together.

❒Set the size and direction of the loaded paper on the control panel or with the printer driver. Make sure the settings do not conflict. Otherwise, the paper may jam or the print quality may be affected.

A Slide the side guides outward, and load paper until it stops with the print side up.

ZKGY200E

Note

❒If you load A4K or larger, or 81/2 ⋅ 11 Kor larger, slide out the bypass tray extension ( )

and then flip it open ( ).

B Adjust the side guides to the paper width.

ZKGY220E

Important

❒Confirm that paper fits under the side guides.

❒Sheets of A4K or 81/2 x 11K length or longer must be loaded one at a time. Support the paper by hand so it feeds in properly. Additionally, since paper feed- ing and image quality may dif- fer depending on paper thickness and width, check print results in advance using paper you intend to print on.

Note

❒45 kg paper or paper of A4Kor 8 1/2 x 11 K or longer may not feed in properly unless it is cut at right angles.

C To set the paper size and feed di- rection, Press the {Menu} key.

AGN028S

AGN503S

The [Menu] screen appears on the display.

20