Replacing the Maintenance Kit

Replacing the Friction Pad

Replace all friction pad of the tray. There are two kinds of friction pads. One is for the paper tray (Tray 1), and the other are for the paper feed unit(s) (Tray 2, 3). The following procedure shows how to replacing friction pad of the paper tray (Tray1).

A Lift the paper tray slightly, and then pull it out until it stops.

AGN029S

B Lift the front side of the tray, and then pull it out of the printer.

C Remove paper from the paper tray. Place the tray upside down on a flat surface.

2

ZKGM160E

D Use a sharp-pointed item like a ball-point pen, to release the two catches that lock the friction pad.

Note

The friction pad may fall off when the catches are released. Place your hand over the fric- tion pad while releasing the catches.

The friction pad spring may come off. Be careful not to lose the friction pad spring.

The catches that lock the friction pad are located at the very back.

ZKGY140E

ZKGM170E

33