Paper and Other Media

Specifying custom size paper for the

Bypass Tray

1Important

❒The settings of custom sized paper that take effect are not the settings made on the control panel but the settings made in the printer driver. There is no need to change the set- tings on the control panel. Howev- er, when using a printer driver other than RPCS, you will need to change the settings on the control panel.

❒Applications that do not allow a custom paper size to be set cannot print on custom sized paper.

Note

❒If you print on A3 or longer sheets, prints may become blurred.

A Press the {Menu} key.

C Check [Bypass Size] appears, and then press the {# Enter} key.

The paper size selection menu ap- pears.

D Press the {U} or {T} key to display [Custom Size], and then press the {# Enter} key.

E Press the {U}or {T}key to set the horizontal value, and then press the {# Enter} key.

Custom Size:

Horiz. 210.0 mm

By pressing the key, the value increases or decreases by 0.1 mm. By pressing and holding the key, the value varies by 1 mm.

F Press the {U}or {T}key to set the vertical value, and then press the {# Enter} key.

AGN503S

The [Menu] screen appears on the display.

B Press the {U} or {T} key to display [Paper Input], and then press the {# Enter} key.

Custom Size:

Vert. 297.0 mm

After about two seconds, the display returns to the menu.

G Press the {Online} key.

The initial screen appears.

Reference

For details about the printer driver, see the printer driver Help.

Menu:

Paper Input

The paper selection menu appears.

22