
Replacing Consumables and Maintenance Kit
E Return the paper tray to its original position, and then remove the friction pad from the tray.
Note
❒The friction pad spring may
|
| come off. Be careful not to lose | |||
|
| the friction pad spring. | |||
2 |
| ||||
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H If your printer is equipped with the optional paper feed unit(s), follow the same procedure when replacing the friction pad.
ZKGM180E
F Insert the new friction pad in the paper tray.Attach the center projection of the new friction pad to the spring, and then align the projection of both sides of the friction pad to the holes of the paper tray. Then push the friction pad as shown in the illustration until it clicks.
ZKGM190E
After pushing in the friction pad, try pushing it several times to check it is properly installed. If it jumps back into position due to the force of the spring, it is properly in- stalled.
34