Loading Paper

E Press the {U} or {T} key to display the loaded paper size, and then press the {# Enter} key.

Tray 2:8 1/2 x 13

After about two seconds, the display returns to the menu.

F Press the {Online} key.

The initial screen appears.

This completes the setting change.

Specifying custom size paper for the optional paper feed unit

Important

When printing on custom size pa- per, specify the paper size using the control panel or printer driver.

The custom size paper selected us- ing the printer driver overrides that selected using the control pan- el. Do not make settings using the control panel if you have already made settings using the printer driver. However, when printing with a printer driver other than the RPCS printer driver, you must configure the settings using con- trol panel.

The following is the range of paper sizes that can be loaded in each type of the paper trays:

Optional paper feed unit (Tray 2, Tray 3): 182 - 297 mm in width and 60 - 432 mm

The printer cannot print from ap- plications that do not support cus- tom size paper.

A Press the {Menu} key.

1

AGN503S

The [Menu] screen appears on the display.

B Press the {U} or {T} key to display [Paper Input], and then press the {# Enter} key.

Menu:

Paper Input

The paper selection menu appears.

C Press the {U} or {T} key to display [Tray Paper Size], and then press the {# Enter} key.

The paper tray selection menu ap- pears.

D Press the {U} or {T} key to display the target paper tray, and then press the {# Enter} key.

Tray Paper Size:

Tray 2

The paper size selection menu ap- pears.

E Press the {U} or {T} key to display [Custom Size], and then press the {# Enter} key.

17