Paper and Other Media

D Push the bottom plate down until it locks into place.

1

ZKGP360E

E Load envelopes into the envelope feeder unit, with the print side down and the flap on the left as shown in the illustration.

ZKGP380E

Important

❒Confirm that the envelope flaps are securely folded down, and that there is no air inside the en- velopes.

Note

❒Confirm that the top of the stack is not higher than the limit mark on the side guides.

❒Confirm that the envelopes fit under the side guides.

❒Do not push the stack of enve- lopes with too much force.

F Pinch the side guides, and then slide them along the edge of the envelope stack.

ZKGY370E

G Pinch the rear guide, and then slide it along the edge of the envelope stack.

ZKGY390E

H Lift the front of the tray, and then slide it carefully into the printer until it stops.

ZKGP340E

Important

❒Do not slide the paper tray in with force. If you do, the front and side guides might move.

26