Paper and Other Media
D Lift the front of the tray, and then slide it carefully into the printer until it stops.
1
A Lift the paper tray slightly, and then pull it out until it stops. Adjust the paper size dial to match the size and feed direction of paper in the paper tray.
ZKGY150E
Important
❒Do not slide the paper tray in with force. If you do, the front and side guides might move.
Reference
For more information about type, size and feed direction of paper that can be loaded in the tray, see p.3 “Paper and Other Media Supported by This Print- er”.
When you change the paper size see p.14 “Changing the paper size”.
Changing the paper size
Important
❒Confirm that the setting of the pa- per size dial matches the paper size and feed direction of the paper in the tray, otherwise the printer might be damaged, or printing problems might occur.
The following explanation uses the example of “Tray 1” for the paper tray.
AGN025S
Important
❒If you want to use the paper size and feed direction that are not
indicated on the paper size dial, set the dial to “p”. In this case, you should set the paper size using the control panel.
B Lift the front side of the tray, and then pull it out of the printer.
ZKGY140E
C If you load paper larger than A4Kor 81/2 ⋅ 11K, you should extend the tray as follows:
Note
❒You cannot load paper smaller than A4K or 81/2 ⋅ 11K, if the tray is extended. In this case, re- turn the tray to its standard length.
14