Manuals / Brands / Computer Equipment / Printer / Ricoh / Computer Equipment / Printer

Ricoh AP610N Cleaning the Registration Roller, A Turn off the power, and then unplug the power cable, B Open the front cover by pushing the front cover release button

1 96

Download 96 pages, 3.18 Mb

Cleaning the Registration Roller

Cleaning the Registration Roller

If the registration roller is dirty, a mis- feed might occur. In this case, clean the roller as follows:

RWARNING:

•Be sure to turn off the power and wait for about 30 minutes before cleaning the registra- tion roller. Not waiting for the printer to cool down can result in a burn.

RCAUTION:

•The inside of this printer be-

comes very hot. Do not touch parts labelled “v” (indicating a hot surface). Touching these parts will result in burns.

Clean the registration roller if dots (caused by specks of paper stuck to the roller) appear on printed OHP transparencies.

A Turn off the power, and then unplug the power cable.

B Open the front cover by pushing the front cover release button.

C Pull the toner cartridge out of the printer by holding the grips of the cartridge.

3

AGN022S

Note

❒Do not hold the toner cartridge upside down or stand it verti- cally.

❒Do not put the toner cartridge on an unstable or tilted surface.

D Wipe around the metallic registration roller by turning with a soft damp cloth.

ZKGX461E

Important

AGN020S	❒ Do not use chemical cleaner or
	organic solvent such as thinner
	or benzene.

47

Contents

Maintenance Guide 1Paper and Other Media 2Replacing Consumables and Maintenance Kit 3Cleaning the Printer 4Adjusting the Printer Page TABLE OF CONTENTS 6. Removing Misfed Paper Removing Misfed Paper When “Remove Misfeed Paper Tray” Appears When “Remove Misfeed Internal Path” Appears When “Remove Misfeed Paper Exit Cover” Appears 7. Appendix Trademarks How to Read This Manual 1. Paper and Other Media Paper and Other Media Supported by This Printer ❖Input Paper Sizes (Metric version) See p.19 “Loading Paper in the Bypass Tray” See p.24 “Loading Envelopes” ❖Input Paper Sizes (Inch version) Page ❖Paper weight and number of sheets to be set ❖Paper size not supported by both side printing Paper Recommendations Loading Paper Storing Paper Types of Paper and Other Media Plain Paper Thick Paper OHP transparencies Envelopes Paper not supported by this printer Print Area ❖Paper ❖Envelope Loading Paper Loading Paper in Tray 1 and the optional paper feed unit Changing the paper size D Slide the catches inwards to unlock the tray G Adjust the rear and side guides to the paper size you want to load E Slide the tray until it stops F Return the catches to their original positions H Load paper into the tray with the print side down Menu: Paper Input [Tray Paper Size] Tray Paper Size: Tray Tray 2: 8 1/2 x F Press the {Online} key Specifying custom size paper for the optional paper feed unit 1 Custom Size: Horiz. 210.0 mm Custom Size: Vert. 297.0 mm H Press the {Online} key Loading Paper in the Bypass Tray Specifying standard size paper for the Bypass Tray Bypass Size: *A4 (210 x 297) G Press the {Online} key Bypass Tray Page Loading Envelopes Loading envelopes into the Envelope Feeder Unit D Push the bottom plate down until it locks into place G Pinch the rear guide, and then slide it along the edge of the envelope stack I Press the {Menu} key M Press the {U} or {T} key to select the envelope type you want to use N Press the {# Enter} key to apply the settings. Wait for a while O Press the {Online} key Switching between Paper Trays 2.Replacing Consumables and Maintenance Kit Replacing the Toner Cartridge A Open the front cover by pushing the front cover release button B Be sure to put the toner cartridge on a stable, flat surface D Take the new toner cartridge from the box G Push down the toner cartridge to settle it in appropriate position H Close the front cover by pressing the left and right side indenta- tions Replacing the Maintenance Kit Before Replacing Replacing the Friction Pad G Push the friction pad until it locks securely F Insert the new friction pad in the paper tray Replacing the Transfer Roller H Take the gloves off J Lower the toner cartridge when it touches the back K Close the front cover by pressing the left and right side indenta- tions Replacing the Paper Feed Rollers G Reinstall the optional duplex unit if it was removed Replacing the Fusing Unit Replacing the fusing unit Replacing the fusing unit with the duplex unit attached Page H Print a configuration page to confirm that the printer works prop- erly 3. Cleaning the Printer Cautions to Take When Cleaning Cleaning the Friction Pad Cleaning the Paper Feed Roller Page Cleaning the Registration Roller G Close the front cover by pressing the left and right side indenta- tions F Lower the toner cartridge when it touches the back 4. Adjusting the Printer Adjusting the Image Density Adjusting Tray Registration I Press the {U}or {T}key to set the digit of the registration value (mm) J K Press the {# Enter} key Press the {Escape} key Registration: Adjustment Page 5. Troubleshooting Error & Status Messages on the Control Panel ❖Messages (in alphabetical order) Page Page Page Page Page Printer Does Not Print terface cable ❖ Network Connection ❖ Ad hoc Mode or 802.11 Ad hoc Mode ❖ Infrastructure Mode Page Checking the port connection Windows 95/98/Me Windows Windows XP Home Edition Windows NT Other Printing Problems Page If the problem cannot be solved, contact your sales or service representative Additional Troubleshooting Page Page 6. Removing Misfed Paper Removing Misfed Paper When “Remove Misfeed Paper Tray” Appears When “Remove Misfeed Internal Path” Appears F Close the front cover by pressing the left and right side indenta- tions When “Remove Misfeed Paper Exit Cover” Appears Removing misfed paper from the exit cover Removing misfed paper from the fusing unit Page When “Remove Misfeed Duplex Unit” Appears Removing the misfed paper inside the cover Removing misfed paper inside the duplex unit Page 7. Appendix Moving and Transporting the Printer Moving the Printer Moving the printer in the short distance Consumables Toner Cartridge Maintenance Kit ❖Maintenance Kit Type Specifications Mainframe ❖Configuration: ❖Print Process: ❖First Print Speed: ❖Paper size: ❖Paper Weight: ❖Media Type: ❖Power Source: ❖Power Consumption: ❖Weight: ❖Warm-upTime: ❖Paper Capacity: ❖Paper Output Capacity: ❖Memory: Options Paper Feed Unit Type ❖Dimensions (W⋅D⋅H): ❖Paper Size: Envelope Feeder Type Memory Unit Type C 256MB ❖Module Type: ❖Memory Type: ❖Number of Pins: 1394 Interface Unit Type 802.11b Interface Unit Type F ❖Protocol: ❖Data Transfer Speed: ❖Frequency Range: ❖Transmittable Distance: INDEX Page Page RICOH COMPANY, LTD