Samsung MSYS 5200 manual Sending a Fax Using a One-Touch Number, Using Address Label

3.The display asks you to enter a name. Enter the desired name (up to 20 digits). For information on how to enter names, see page 2.4.

Or

If you donÕt want to assign a name, skip this step.

If you assign a name to the number, the name appears in the display when you press the one-touch button.

4.Press Enter when the name appears correctly or without entering a name.

5.To set another one-touch number, press the desired one-touch button and repeat steps 2 through 5.

Or

To return to Standby mode, press Stop.

Sending a Fax Using a One-Touch Number

1.Load a document you want to send a fax.

2.Press the one-touch button (01 through 20) to which you stored a number. The number will be automatically dialed, then the document begins to transmit when the remote fax machine answers the phone.

Using Address Label

A One-touch label sheet is included with your machine. As you store numbers in one-touch dial buttons, make a note of the numbers on the label to remind you which number is stored in each position.

1. Remove the clear cover and label using an instrument with a pointed end, as shown at right.

2.Write information on the label and replace the label and cover.

You may want to use pencil in case you wish to change these numbers later.

2.28 Automatic Dialing