Tone
You may often need to use Touch Tone dial signals to perform special operations by phone.
1.Dial the number using pulse dialing.
2.When the remote phone answers, press . Any numbers you now press will be sent as Touch tones for the remainder of the call.
3.Dial the remaining numbers required by the service. The machine returns to the pulse mode after you finish the call.
Flash
Some special phone services require a
1.When you are on the telephone and hear the call waiting signal, press Flash once. The first caller is on hold and you are speaking to the second caller.
2.Press Flash again to talk to the first caller again.
Note: If you do not have a special service that uses the
press Flash during a call. If you do, you could disconnect the line.
2.34 Other Functions