Samsung MSYS 5200 manual Receiving Manually in TEL Mode, Receiving Automatically in ANS/FAX Mode

Receiving Manually in TEL Mode

1.Press Rcv.Mode until the display shows ÔTEL.Õ

2.When the telephone rings, pick up the handset and answer it.

3.If you hear a fax tone, or if the person on the other end asks you to receive a document, press Start on the machine.

Or, press the buttons Ô 9 Õ (star-nine-star) on the extension telephone.

Ô 9 Ô is the remote receive start code preset at the factory. The first and the last asterisks are fixed, but you can change the middle character to whatever you choose. For more information, see page 2.37.

4.Replace the handset. The machine begins receiving and returns to Standby mode when reception is complete.

Note: If your machine is not equipped with handset, youÕll pick up the handset of the extension phone connected to EXT.LINE jack.

2 Operation

Receiving Automatically in ANS/FAX Mode

To use this mode, you must attach an answering machine to the EXT.LINE jack on the back of your machine (see page 1.8).

1.Press Rcv.Mode until the display shows ÔANS/FAX.Õ

2.When you get a call, the answering machine answers it. If the caller leaves a message, the answering machine stores the message normally.

If your machine hears a fax tone on the line, the fax receive mode is activated.

Notes:

¥If you have set your machine to ANS/FAX mode and your answering machine is switched off, or no answering machine is connected to the machine, the machine will automatically go into fax receive mode after several rings.

¥If your answering machine has a Ôuser-selectable ring counterÕ, set the machine to answer incoming calls within 4 ring.

¥If you are in TEL mode (manual reception) when the answering machine is connected to your machine, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation.

Receiving a Fax 2.19