Display Related

Q1 The LCD screen is blank.

AAdjust the LCD screen brightness. Use the <Fn>+</>, <Fn>+</> keys.

Q2 The screen saver disturbs screen viewing during Media Player or video file operation.

AUnder the Media Player Options, in Player tab > Allow screen saver during playback, clear the check box and restart the player.

Q3 In DOS mode, changing the full screen DOS mode by pressing <ALT>+<Enter> keys displays a broken image for a short period.

AThe DOS mode which supports 2 Byte characters such as Korean and Japanese runs in graphic not in text mode. In this case, a broken image may be displayed while changing the video mode settings.

Q4 In the following cases, the screen may blink or display noise for a short time: (Changing the resolution, changing the display device, removing the AC adapter, restarting the system, entering or escaping standby/hibernate mode)

AThis may happen while the video driver is examining the connected device. If the screen continues to display noise, press touchpad right button on the desktop and click Refresh, or restart the computer.

Q5 To uninstall the graphics driver

AThere are two graphics drivers installed: 'ATI Control Panel' and 'ATI Display Driver'.

Click Start > Control Panel > Add or Remove Programs, and uninstall 'ATI Control Panel' in the Change or Remove Program menu. Without restarting the computer, uninstall ’ATI Display Driver’. After uninstalling both drivers, restart the computer.

Q6 In Windows, full DOS screen is not displayed through the monitor.

AFull DOS screen is displayed only through the primary display device. Change the display setting to LCD, or set the monitor to primary device.

Troubleshooting 91