If you do not know the network name when you connect to the AP, click Scan and select a network from the network name list displayed.

To construct a computer-to-computer wireless network, both computers have to use the same network name.

6.If a network key is configured in the AP or computer-to-computer wireless network, select 'Enable Data Security' in [Set Security] window, and then enter the same network key. Click Next.

For the network key (WEP KEY) of the AP, ask your AP or network administrator.

You are recommended to use a network key (WEP KEY) when you construct a computer-to-computer wireless network to prevent access from unauthorized users. Create a new network key in the first computer, then enter the previously created network key in the other computer.

The network key can be 5 or 13 alphanumeric characters (e.g. magic) or 10 or 26 hexadecimal digits (a combination of numbers "0" to "9" and letters "a" to "f").

7.In the [Power Management] window, click Finish.

To use maximum performance by default, select ’Off’. To minimize power consumption, select ’On’.

This item is not displayed when you configure the computer-to-computer wireless network settings.

Connecting to the Internet 49