Using the save modes
Toner Save mode
Toner Save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces print quality.
To turn this mode on or off, press Toner Save.
Note
When
Power Save mode
Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.
1Press Menu until System Setup appears on the bottom line of the display and press OK.
2Press OK when Machine Setup appears.
3Press the Scroll buttons until Power Save appears and press OK.
4Press the Scroll buttons until On appears and press OK.
5Press the Scroll buttons until the time setting you want appears and press OK.
6Press Stop/Clear to return to Standby mode.
Scan Power Save mode
Scan Power Save mode allows you to save power by turning off the scan lamp. The scan lamp under the scanner glass automatically turns off when it is not in actual use to reduce power consumption and extend the life of the lamp. The lamp automatically wakes up after some
You can set the length of time for which the scan lamp waits after a scan job is completed before it switches to the power save mode.
1Press Menu until System Setup appears on the bottom line of the display and press OK.
2Press OK when Machine Setup appears.
3Press the Scroll buttons until Scan PWR Save appears and press OK.
4Press the Scroll buttons until the time setting you want appears and press OK.
5Press Stop/Clear to return to Standby mode.
Setting print job timeout
You can set the amount of time a single print job is active before it must print.
The machine handles incoming data as a single job if it comes in within the specified time. When an error occurs while processing data from the computer and the data flow stops, the machine waits the specified time and then cancels printing if data flow does not resume.
1Press Menu until System Setup appears on the bottom line of the display and press OK.
2Press OK when Machine Setup appears.
3Press the Scroll buttons until Job Timeout appears and press OK.
4Press the Scroll buttons until the time setting you want appears and press OK.
5Press Stop/Clear to return to Standby mode.
Altitude Adjustment
The atmospheric pressure could affect the printing quality. If you use the machine in over 1,500 mm height altitude area, set the Altitude as recommended in step 4 below.
1Press Menu until System Setup appears on the bottom line of the display and press OK.
2Press OK when Machine Setup appears.
3Press the Scroll buttons until AltitudeAdjustment appears and press OK.
4Press the Scroll buttons until the binding option you want appears.
•Plain: sets the machine to work best in altitude: 0 ~ 1500m.
•High: sets the machine to work best in altitude: 1500 ~ 2500m.
•Higher: sets the machine to work best in altitude: 2500 ~ 3500m.
•Highest: sets the machine to work best in altitude: 3500 ~ 4000m.
5Press OK to save your selection.
6Press Stop/Clear to return to Standby mode.
Auto Continue
This is the option to set the machine to continue printing or not, in case the paper size you have set and the paper within the tray mismatches.
1Press Menu until System Setup appears on the bottom line of the display and press OK.
2Press OK when Machine Setup appears.
2.5 <System setup>
