Covers
The machine automatically adds covers to your copied set using stock taken from a different tray than the copies.
1Press Copy.
2Place a single original face down on the scanner glass.
For details about loading an original, see page 5.1.
3Press Menu until Copy Feature appears on the bottom line of the display and press OK.
4Press OK when Covers appears.
5Press the Scroll buttons until the binding option you want appears.
•Off: sets the machine not to use this feature.
•Front: prints the front cover.
•Back: prints the back cover.
•Front&Back: prints both of the front and back cover.
6Press OK to save your selection.
7Press the Scroll buttons until the binding option you want appears.
If you selected Off go to step 10.
•Blank Covers: prints the bank cover paper. If you select Front&Back in the previous step, the blank cover will be printed as a cover.
•Printed Covers: prints the first page as a cover, and the rest of the page as contents. If you select Front&Back in the previous step, the last page will be printed as a cover.
8Press OK to save your selection.
9Press the Scroll buttons until the paper type you are using appears and press OK.
10Press Stop/Clear to return to Standby mode.
11Press OK or Start to begin copying.
Transparencies
The machine adds either a blank or printed divider between each transparency within a set.
1Press Copy.
2Place a single original face down on the scanner glass.
For details about loading an original, see page 5.1.
3Press Menu until Copy Feature appears on the bottom line of the display and press OK.
4Press OK when Transparencies appears.
5Press the Scroll buttons until the binding option you want appears.
•Off: does not use this feature.
•MP Tray: adds any blank or printed divider between each transparency.
Note
You must use MP tray to use transparency.
6Press OK to save your selection.
7Press the Scroll buttons until the binding option you want appears.
If you selected Off go to step 10.
•Blank: adds blank paper between each transparency.
•Printed: prints data on transparency and same data on paper.
8Press OK to save your selection.
9Press the Scroll buttons until the paper type you are using appears and press OK.
10Press Stop/Clear to return to Standby mode.
11Press OK or Start to begin copying.
6.6 <Copying>
