Samsung SCX-6x22 manual Multi-purpose tray, Changing the size of the paper in the paper tray

Notes

• If you experience problems with paper feed, place one sheet at a time in the multi-purpose tray.

•You can load previously printed paper. The printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed.

Changing the size of the paper in the paper tray

To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray.

2After inserting paper into the tray, while pinching the paper width guide as shown, move it toward the stack of paper until it lightly touches the side of the stack. Do not press the guide too tightly to the edge of the paper; the guide may bend the paper.

1

2

1 paper length guide

2 paper width guide

1Adjust the paper length guide to the desired paper length. It is preset to Letter or A4 size depending on the country. To load another size, lift and insert the length guide into the corresponding position.

Notes

• Do not push the paper width guides far enough to cause the materials to warp.

•If you do not adjust the paper width guides, it may cause paper jams.

In the multi-purpose tray

The multi-purpose tray can hold special sizes and types of print material, such as transparencies, postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper.

To load paper in the multi-purpose tray:

5.6 <Loading originals and print media>