![](/images/new-backgrounds/1164466/16446673x1.webp)
Object Watch
Object watch is a feature that monitors changes in objects by comparing the current video feed segment with a previous video feed segment. When a change is detected within a set monitoring duration this triggers as an event and the DVR will commence recording. This feature can be confi gured so that an event triggers recording on associated cameras, alarm outputs, spot monitor output, etc.
1
3
5
8
1Video Display window
This window is used to defi ne the object watch zone for the selected video feed.
Set Object Watch Zone:
Deactivate Object Watch Zone:
2Object Detection Settings
Reference Picture: Displays the reference picture.
Current Picture: Displays the current picture. Set Reference Picture:
Designates the current video as the reference picture.
Set minimum Hold Time:
Used to defi ne the minimum monitoring duration. An object watch event is generated only if an object change lasts for longer than the minimum monitoring duration.
Block Count: Use to designated the number of blocks for object detection.
Sensitivity: Use to select the sensitivity of object detection.
Set All Area: Selects the whole screen for object detection.
Erase All Area: Clears the screen of any object detection blocks.
3Action Settings
Full Screen: Enable or disable full screen display of video feed upon an object watch event.
Beep: Enable or disable the buzzer for events.
2
4
6
7
9
4Rec Time
Pre rec time: Use to confi gure how long to record for leading up to a detection event.
Post rec time: Use to confi gure how long to record for following a detection event.
5Spot Full Up
Enable or disable full screen spot monitor pop up of the video feed when a object event occurs. Dwell Time: Use to confi gure the duration for
displaying the camera on the spot port.
6Linked pTZ
Camera: Use to associate a PTZ to a object watch event. When an event takes place, this feature moves the selected PTZ to a preset position.
Preset: Use to select the desired PTZ preset.
7Linked Camera
Link other cameras to record when the selected camera detects an object event. Multiple cameras can be linked via object watch.
8Apply to
The selected channel setting value can be applied to all or selected channels.
9Linked Alarm Out
Link Alarm Outs to trigger on object detection mul- tiple alarms can be linked via object.
05 SYSTEM SETUp
System Setup _33