Samsung SHR-9716 Colors or abnormal shapes, Cause, Connected sensors are not working, Properly

PROBLEM	SOLUTION
Some cameras show video images in weird	 Check the cameras connected to the system. Switch the camera
colors or abnormal shapes..	that displays defected images with the another camera that
	displays images correctly, then you can check which camera
	is not working properly or whether SPR-9816/9716 system is
	defected.
	 Check camera video format types. Countries around the world
	use different video broadcasting standards such as PAL, NTSC,
	or SECAM. However each standard is incompatible with the
	other in terms of video image transmission method and the video
	image processing methods. In this case, video images will be
	displayed, but not in recognizable shape. Check the video format
	type sent from connected cameras and image processing
	method set in [System Menu] are identical.
Displayed video signals have a lot of noise.	 Check the cameras connected to the system. Switch the camera
	that displays defected images with the another camera that
	displays images correctly, then you can check which camera
	is not working properly or whether SPR-9816/9716 system is
	defected.
	 Check the cable connections between camera and
	SPR-9816/9716. Check that these cables are not shorted,
	mixed or disconnected.
	 Check the surroundings of cable connections between camera
	and SPR-9816/9716. Check if there is any high-voltage power
	line around the cable connections. If there is a high-voltage
	power line nearby the cable connections, it can degrade video
	image quality or causes noises.
	 Check the cable connections between camera and
	SPR-9816/9716. Check if the cables are the correct type for
	transferring video signals. If you have used for example power
	cables for video image transmission, it can cause noise on the
	displayed video image.
Sometimes the system reboots without any	 If SPR-9816/9716 is not working properly, or there is malfunction,
cause.	the embedded self diagnosis feature might cause the system to
	reboot.
Connected sensors are not working	 Check the sensor types set in Camera Setup menu are identical with
properly.	the sensors actually connected to the system.
	 Check if the system’s sensors are enabled in the [Recording Setup]-
	[Recording Schedule] menu.
	 Check if the sensors are correctly connected to power source.
	 Check if the sensors’ signal lines are correctly connected.
Connected control devices are not working	 Check if the control devices are enabled in the Camera Setup menu.
properly.	 Check if the control devices are correctly connected to power
	source.
	 Check if the signal lines of the control devices are correctly
	connected.

09 appendix

appendix _81