troubleshooting
PictBridgeMessage | Informs that... | Action | |
Read Error | There are some problems | Release the protection. | |
with file. | |||
Ink Error | There are some problems | • Check the ink cartridge. | |
with the ink cartridge. | • Replace the ink cartridge. | ||
| |||
Paper | There are some problems | Check the paper. | |
Error | with the paper. | ||
| |||
Print Error | There are some problems | Turn the printer power off and on. | |
with the printer. | |||
|
|
Refer also to the user manual for the printer to be used.
When there is dew condensation, put the camcorder aside for a while before using.
CAUTION • What is dew condensation?
Dew condensation happens when a DVD camcorder is moved to a place where there is a significant temperature difference from the previous place. The dew condenses on the external or internal lenses of the DVD camcorder and on the reflection lens and the surface of the disc which are related to playback. When this happens, you temporarily may not use the record or play functions of the DVD camcorder. Also, using the camcorder while there is condensation may cause malfunction or damage.
•What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.
•When does the dew condensation occur?
When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area suddenly, it will cause condensation.
-When recording outside in cold weather during the winter and then using it in indoors.
-When recording outside in hot weather after being indoors or inside a car where the AC was running.
Note before sending your camcorder for repair.
•If these instructions do not solve your problem, contact your nearest Samsung authorised service centre.
•Depending on the problem, the internal memory may need to be initialised or replaced and the data will be deleted. Be sure to back up the data on your PC before sending your camcorder to repair. Samsung cannot guarantee any loss of your data.
108_ English
故障处理
PictBridge信息 | 说明内容…… | 处理 | ||
Read Error | 文件出现问题。 | 取消保护该图像。 | ||
( 读取错误 ) | ||||
|
|
| ||
|
|
|
| |
Ink Error | 墨盒出现问题。 | | 检查墨盒。 | |
( 墨水错误 ) | | 为墨盒注墨。 | ||
| ||||
Paper Error | 纸张出现问题。 | 检查打印机智障。如果没有放纸， | ||
( 纸张错误 ) | 请放入纸张。 | |||
| ||||
|
|
|
| |
Print Error | 打印机出现问题。 | 将打印机关闭然后再打开。 | ||
( 打印错误 ) | ||||
|
|
| ||
还可以参见使用打印机的用户说明书。 |
|
| ||
当有露水凝结的时候，请在使用前放置一段时间。
什么是露水凝结？
注意 | 当数码摄像机从一个地方移动到另一个温度明显有差异的地方，就 |
| |
| 会发生露水凝结现象。换句话说，空气中的水蒸汽因为温度的差异 |
| 转变成露水。并且在数码摄像机镜头的内部和反射镜头，以及与播 |
| 放相关的光盘表面上凝结成露水。当发生这种情况时，数码摄像机 |
| 的录制以及播放功能可能会暂时失灵。而且，如果有露水凝结的现 |
| 象时接通电源，很可能导致数码摄像机失灵或者损坏。 |
怎样处理呢？
关闭电源并且卸下电池组，在使用数码摄像机之前将其放置于干燥 的地方1～2 个小时。
何时会发生露水凝结？
当设备被重新放置回一个温度更高的地方，或是突然在高温地区使 用时，会发生露水凝结。
-冬天，在室外寒冷的天气中进行录制，然后进入室内使用时。
-当在室外炎热的天气进行录制，后又进入室内或者汽车内充 电时。
修理数码摄像机前的注意事项
如果这些说明不能解决问题时，请与最近的三星授权服务中心联系。
根据出现的问题, 当前的硬盘也许需要初始化或更换并且删除数据。 请 务 必 在 数 码 摄 像 机 送 出 修 理 之 前 ， 将 数 据 备 份 到 硬 盘 或 是 其 他 存 储 介 质 上 。 三 星 公 司 不 能 保 证 不 会 弄 丢 您 数 据 。