Samsung VP-DX10/XEE Digital Zoom 数字变焦, Up to 26X zoom is performed optically, 1200x Digitally

•The LED light enables you to record a subject in dark places.

•The LED light can be used with C. Nite function only.

•When using C. Nite, the focus adjusts slowly and white dots may appear on the screen, this is not a defect.

•Colour Nite function is not available with the following functions: “Scene Mode(AE),” “Shutter,” “Exposure,” “Digital Zoom,” “Digital Effect (“Emboss2,” Mosaic,” “Mirror,”and “Pastel2”).”

•If Anti-Shake(HIS) is set, C. Nite mode will be released.

•The LED light will not turn on or off while you are recording.

•The range of the LED light is limited. (up to 6.6ft (2m))

•C.Nite function is available only in movie mode.

Digital Zoom

You can select the maximum zoom level in case you want to zoom to a level greater than 26X (the default setting) during recording. Zooming more than 26x is achieved digitally, up to 1200x when combined with optical zoom.

Please disable 16:9 Wide mode to use the Digital Zoom function. page 64 The zooming zone appears when you select the zooming level.

This right side of the bar shows the digital zooming factor. The zooming zone appears when you select the zooming level.

Settings	Contents	On-screen
		display
Off	Up to 26X zoom is performed optically.	None
100x, 200x,	Up to 26X zoom is performed optically, and after
400x,	that, up to 100x (200x, 400x, or 1200x) is performed	None
1200x	digitally.

•The image quality may deteriorate depending on how much you zoom in on the subject.

•Maximum zooming may result in lower image quality.

•Digital Zoom is not available while “Anti-Shake(HIS),” “EASY Q,” “C. Nite,” “16:9 Wide,” “Digital Effect”(“Emboss2,” Mosaic,” “Mirror,”and “Pastel2”) is in use.

•Once “C.Nite,” “EASY Q,” “16:9 Wide,” “Digital Effect”(“Emboss2,” Mosaic,” “Mirror,”and “Pastel2”) is selected, Digital Zoom mode will be released. (The Digital Zoom mode will be backed up.)

•Once Anti-Shake(HIS) is selected, Digital Zoom mode will be released.

•This function can be set in movie mode only.

LED 灯可让您在黑暗的环境中录制物体。

LED 灯只能与 C.Nite 功能配合使用。

使用 C.Nite 时，聚焦调整很慢，屏幕上还可能会出现白点，这不是缺陷。

C.Nite 功能不能与以下功能配合使用：“Scene Mode(AE)”( 场景模式 (AE))、“Shutter”( 快门 )、“Exposure”( 曝光 )、“Digital Zoom”( 数

字变焦 )“Digital、 Effect”( 数字效果 )(“Emboss2”( 浮雕 2)“、Mosaic” ( 马赛克 )、“Mirror”( 镜像 ) 和“Pastel2”( 柔和 2))。

防震动 (HIS) 功能一旦被设置，C.Nite 功能将被取消。

在录制过程中，将不能打开或关闭 LED 灯。

LED 灯的光照范围有限。（最远 6.6ft（2 米））

彩色夜景功能只能在影音模式下使用。

Digital Zoom( 数字变焦 )

在录制的过程中，如果预得到大于 26x（默认设置）的变焦值，您可以通过变焦控制 杆选择更大的变焦。当与光学变焦配合使用时，可达到 1200x 的变焦值。

请禁用 16:9 宽屏幕模式来使用此功能。 第 64 页 当您使用变焦控制杆时变焦指示条便会出现。

指示条的右侧即为数字变焦的区域。当使用变焦控制杆时变焦指示条便会出现。

设置	内容	屏幕显示
Off( 关闭 )	仅使用 26X 的光学变焦。	无
	不仅使用 26X 的光学变焦，在此之外，
100x，200x, 400x，1200x	还可以使用达到100x(200x, 400x, 或	无
	1200x) 的数字变焦。

根据您对被摄主题放大的倍数，图像质量也许会有所下降。

最大变焦也许会降低图像质量。

当使用“Anti-Shake(HIS)”( 防震动（HIS）)，“EASY.Q，“C.Nite，“16:9 Wide”(16:9 宽屏幕 )，“Emboss2”( 浮雕 2)、“Mosaic”( 马赛克 )、“Mirror” ( 镜像 ) 和“Pastel2”( 柔和 2) 功能时，不能使用数字变焦功能。

“C.Nite”“，EASY.Q”“，16:9 Wide”(16:9宽屏幕)“，Mosaic”(马赛克)“，Mirror” ( 镜像 )，“Emboss2”( 浮雕 2)，或“Pastel2”( 柔和 2) 一但被设置，数字 变焦将被取消。（数字变焦模式将被备份。）

防震动（HIS）一旦被设置，数字变焦模式将被取消。

此功能只能在影音模式中设置。

67_ English 中文 _67