Samsung VP-DX10/XEF, VP-DX10H/XEF, VP-DX10/XEO, VP-DX10/XEE Troubleshooting, 故障处理, Power source

troubleshooting

TROUBLESHOOTING

Before contacting a Samsung authorised service centre, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Warning indicators and messages

Power source

Message	Icon	Informs that...	Action
			Replace with a charged battery or connect the
Low Battery		The battery pack is	AC power adaptor. (If the AC power adaptor
			is connected when “Low Battery” is displayed,
		almost discharged.
			the power is turned off and the charging
			starts.)
Storage media

Message	Icon	Informs that...	Action
Memory Full		There is not enough	Delete unnecessary files on the built-in
			memory. Use another storage media.
		memory to record.
			page 31
Insert Disc		There is no disc in DVD	Insert a disc.
		camcorder.
Disc Full		There is not enough disc	Change to a new disc.
		space.	Erase recorded image.
Finalised Disc		The disc is finalised.	To record on a DVD-RW/+RW disc, unfinalise it.
		The disc is not recognised in
Not Supported		the DVD camcorder.	The supported discs are DVD-R, DVD+R DL,
		The disc is finalised in the	DVD-RW and DVD+RW.
Disc
		camcorders manufactured	Use a new disc.
		by other companies.
		File system does not match	Reformat the disc for –RW/+RW.
Disc Error		to the disc. Disc is formatted	Scratch should not be on the surface of the
		in the PC.	disc.
		The power is suddenly	To recover previous data in your disc or memory
			card, turn the power off and on.
Write Error		turned off while recording,
			After recovering data, the system will be
		the file writing is not properly
			switched to STBY mode. If it fails to recover
		done.
			data, “Disc Error” or “Card Error” appear.
Not Supported		The memory card is not	Change the memory card that we
			recommended.
Card		supported in this camcorder.
			pages 32-33
Card Error		The memory card or the	The memory card could be damaged. Try with
		controller are corrupted.	another memory card.

故障处理

故障处理

在联系三星授权维修中心前，请进行如下简单的检查。

警告图标和提示信息 电源

信息	图标			说明内容……	处理
					更换一块新的电池组或使用交流电
					源适配器 ( 如果交流电源适配器已被连
电池电量低			电池组电量即将消耗殆尽。		接而仍然显示“Low Battery”( 电量低 )
					提示信息，请关闭摄像机电源然后开始
					充电。)
存储介质
信息		图标		说明内容……	处理
Memory Full				存储器中没有足够的存储空	删除内置存储器中一些多余的文件。
( 内存已满 )				间进行录制。	使用另一种存储介质。 第 31 页
Insert Disc				DVD 摄像机内没有插入光	插入一张光盘。
( 插入光盘 )				盘。
Disc Full				光盘没有足够的空间。	更换一张光盘。删除已录制的图像。
( 光盘已满 )
Finalised Disc				光盘已被终结。	若要在 DVD-RW/+RW光盘上录像，请取
( 已终结光盘 )					消终结。
Not Supported Disc				本 DVD 摄像机不支持此光	被 支 持 的 光 盘 种 类 有 DVD-R, DVD+R
				盘。本光盘已在其它厂商	DL, DVD-RW 和 DVD+RW。使用一张新的
( 光盘不受支持 )
				的摄像机上终结。	光盘。
Disc Error				文件系统与光盘不匹配。	重新格式化 RW/+RW 光盘。
( 光盘错误 )				光盘在电脑上被格式化。	光盘表面不应有划痕。
					要恢复光盘或存储卡中的先前数据，
					请关闭电源，然后再打开。
Write Error				写入数据时，光盘或存储	在恢复数据之后，系统将被自动切换
( 写入错误 )				卡出现问题。	到 STBY 待机模式。如果无法恢复数据，
					则屏幕上显示“Disc Error”(光盘错误)
					或“Disc Error”( 卡错误 ) 的提示信息。
Not Supported Card				本 DVD 摄像机不支持此存	更换被推荐的存储卡。第 32-33页
( 卡不受支持 )				储卡。
Card Error				存储卡或控制器损坏。	存储卡可能已经损坏。
( 卡错误 )					请尝试更换另外一张存储卡。

106_ English 中文 _106