troubleshooting
Symptom | Explanation/Solution | ||
An afterimage remains | • | This occurs if you disconnect the AC power adaptor or | |
on the LCD screen. |
| remove the battery pack before turning the power off | |
|
|
| |
The image on the LCD | • | Ambient light is too bright. Adjust the brightness and angle | |
| of LCD. | ||
screen looks dark. |
| ||
• | Use LCD enhancer function. | ||
|
Symptom | Explanation/Solution | |
| • | The internal temperature of your camcorder is unusually |
|
| high. Turn off your camcorder and leave it for a while in a |
|
| cool and dry place. |
The disc cannot be | • | Your camcorder is damp and moist inside (condensation). |
| Turn off your camcorder and leave it for about 1 hour in a | |
removed. |
| |
| cool and dry place. page 108 | |
|
| |
| • | Finalising is interrupted by turning off your camcorder. |
|
| Turn on your camcorder and remove the disc only when |
|
| the finalisation is completed. pages |
Disc is not recognised |
|
|
and the disc cover | • | The disc is damaged. Replace with a new disc. |
opens. |
|
|
Symptom | Explanation/Solution |
| ||
| • | Press the MODE button to set Movie ( | ). | |
| • | There is not enough free space to record on the | ||
Pressing the Recording |
| memory, DVD disc, or memory card. |
| |
• | Check if memory card is not inserted or | |||
Start/Stop button does |
| set to lock. |
| |
not start recording. |
|
| ||
• | Your camcorder is damp and moist inside (condensation). | |||
| ||||
|
| Turn off your camcorder and leave it for about 1 hour in a | ||
|
| cool, dry place. page 108 |
| |
The actual recording | • | The estimated recording time is calculated by some | ||
time is less than the |
| references. |
| |
estimated recording | • | When you record an object that moves fast, the actual | ||
time. |
| recording time may be shortened. |
|
110_ English
故障处理
症状 | 解释/解答 | ||
|
|
| |
LCD 显示屏上有残像 | | 如果您在关闭电源之前拔开交流电能适配器或去除电池组会 | |
|
| 发生这种情况。 | |
|
|
| |
LCD 显示屏上画面 | | 四周太明亮。调整LCD亮度和角度。 | |
灰暗 | | 使用 LCD 增强器功能。 | |
|
|
| |
光盘 |
|
| |
|
| ||
症状 | 解释/解答 | ||
|
|
| |
| | 摄 像机内部温度过高。请关闭您的摄像机并且将它放到一个 | |
|
| 凉爽干燥的地方一段时间。 | |
不能取放光盘 | | 您 的摄像机内部受潮(结露)。请关闭您的摄像机并且将它 | |
| 放到一个凉爽干燥的地方一个小时左右。 第 108 页 | ||
|
| ||
| | 在 光盘终结的过程中关闭了摄像机。仅可以在终结光盘完毕 | |
|
| 之后,才可以打开您的摄像机并取放光盘。 第 | |
|
|
| |
不能识别光盘,光盘 | | 这是一张已损坏的光盘。更换一张新的光盘。 | |
盖打开 |
|
| |
|
|
| |
录制 |
|
| |
|
| ||
症状 | 解释/解答 | ||
|
|
| |
| | 按 MODE 按钮以设置为影音模式 ( ). | |
| 在内置存储器或者存储卡上已经没有足够的存储空间用 | ||
按下录制开始/停止 |
| 来录制。 | |
| 检查是否没有插入存储卡或者存储卡的写保护片设置为 | ||
按钮却不能进行录制 | |||
|
| 关闭。 | |
| | 您的摄像机内部受潮(结露)。请关闭您的摄像机并且将它放 | |
|
| 到一个凉爽干燥的地方一个小时左右。 第 108 页 | |
|
|
| |
实际录制时间少于估 | | 估计可录制的时间仅为参考值。 | |
计的时间 | | 当您录制一个快速移动的物体,实际录制的时间也许会缩短。 | |
|
|
|