Scanning From the Operation Panel

6. Click the Apply button.

7. Repeat Steps 4 through 6 for each of events SC2 through SC6 (select Sharp

Button Manager I for each event). When finished, click the OK button to close the window.

Windows2000

1. Click the Start button, point to Settings, and select Control Panel.

2. In the Control Panel, double-clickScanners and Cameras.

3. Select SHARP AM-400and click the Properties button.

4. Click the Events tab in the SHARP AM-400Properties.

5. Select SC1 from the Scanner events list.

6. In Send to this application, select Sharp Button Manager I.

If other applications appear in the list, make sure that none are selected.

7. Click the Apply button.

8. Repeat Steps 5 through 7 for each of events SC2 through SC6 (select Sharp

Button Manager I for each event). When finished, click the OK button to close the window.

To make the new scanner event settings take effect, you must restart your computer.

7. Scanning

121

Page 127
Image 127
Sharp AM-400 121, Control Panel, double-clickScanners and Cameras, Send to this application, select Sharp Button Manager