Sharp AM-400 manual Line Monitor, To select Duplex Scan, press

Selecting Temporary Fax Settings

Duplex Scan

Duplex Scan provides a convenient method for faxing multiple two-sided originals using the auto document feeder. When this setting is selected, after the stack of originals is fed through the auto document feeder the first time, you simply turn the stack over (do not change the order of the pages or remove any pages), insert it into the auto document feeder again, and press

to scan the back side of the originals. The machine will automatically

transmit the pages in the correct order (front of 1st page, back of 1st page, front of 2nd page, back of 2nd page, etc.).

♦Note that any blank sides must be included when scanning the pages (if the number of pages is not equal each time the machine scans the stack, an error will result).

To select Duplex Scan, press	DUPLEX SCAN
	once or twice so that “DUPLEX SCAN

ON” appears, and then press ENTER .

Line Monitor

Select this setting when you wish to listen to the line (hear the dial tone, fax tones, etc.) through the machine’s speaker during a fax transmission. This is useful when you wish to make sure that the receiving machine is responding correctly.

FAX

To select Line Monitor, press one or more times until MONITOR ON appears in the display.

♦The Line Monitor setting automatically reverts to the default setting after the fax transmission is finished.

78