Loading the Fax Paper

2 Remove the packing paper from the paper compartment.

Remove cardboard and tape

FO-175 only:

Remove the tape

3 FO-175 only: Make sure the ends of the guide wire are inserted in the holes. (If the guide wire is not inseted correctly, out-of-paper detection will not be possible.)

4 Unwrap the roll of fax paper and place it in the compartment.

Important: The roll must be placed so that the leading edge of the paper unrolls as shown. (The paper is only coated on one side for printing. If the roll is placed backwards, the paper will come out blank after printing.)

YES NO!

10

Page 21
Image 21
Sharp FO-175, FO-375 operation manual YES no