Settings
Item | Description | |
|
| |
| Set the number to be assigned to the program. The lowest available number is | |
Program Number | automatically entered. To change the number, enter a number from 01 to 48. A | |
| number that has already been stored cannot be used. | |
|
| |
Program Name | Enter a maximum of 36 characters for the program name. | |
|
| |
| Select the address(es) to be used in the program from the address book. Up to 500 | |
Address | destinations can be stored in one program. (If a Scan to Network Folder destination | |
| is selected, only one destination can be stored.) | |
|
| |
Address Book screen | This displays a list of the currently stored addresses. | |
|
| |
Address Review | This displays a list of the selected addresses. Addresses can be deleted from this list | |
if needed. | ||
| ||
|
| |
Address Mode Setting | Select the mode in which the address is used (Internet fax, scan, etc.) When a mode | |
is selected, the settings for that mode appear. | ||
| ||
|
| |
Mode Settings | Frequently used settings can be stored in the same way as when they are selected | |
for a mode. For more information, see the manuals for each mode. | ||
| ||
|
|
22