Image Send Settings
Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings.
For explanations of settings related to the fax function, see "4. SYSTEM SETTINGS FOR FAX" (page 93).
Operation Settings
The operation settings below apply to all image send functions.
Other Settings
Default Display Settings
You can select one of 6 base screen types for the base screen that appears when the [IMAGE SEND] key is touched or when the [CLEAR ALL] ( 
) key is pressed in image send mode.
•Address Book (ABC)
•Address Book (User)
•Scan
•Internet Fax
•Fax
•Data Entry
Hold settings for a while after scanning has been completed
Use this setting to hold the settings after scanning is completed (until Auto Clear Mode activates).
Switch Automatically to Copy Mode Screen
Enable this setting to have the screen automatically switch to the copy mode screen if no action is taken in the image send mode screen for 20 seconds.
Default Exposure Settings
This is used to set the default exposure settings for scanning a document in image send mode. Select [Auto] or [Manual]. When [Manual] is selected, the exposure can be set to one of 5 levels.
Default Original Image Type
Select the original type beforehand to enable transmission at a resolution suitable for the original (only in scan mode and USB memory mode).
The settings are shown below.
•Text/Printed Photo
•Text/Photo
•Text
•Photo*
•Printed Photo*
•Map*
*Does not appear when the exposure is set to [Auto].
Moiré Reduction
This reduces the moiré effect (line pattern) that occurs when printed matter is scanned (only in scan mode and USB memory mode).
Initial Resolution Setting
The following settings are available for the default resolutions of scan, Internet fax, and fax mode. Scan : 100X100 dpi, 200X200 dpi, 300X300 dpi,
400X400 dpi, 600X600 dpi Internet fax : 200X100 dpi
Must Input Next Address Key at Broadcast Setting
This setting is used to require that the [Next Address] key be touched before the next address is entered when performing a broadcast transmission.
200X200 dpi
200X400 dpi
400X400 dpi
600X600 dpi
Fax: Standard
Fine
Half Tone
When this setting is enabled, the [Next Address] key cannot be omitted even if the next address is entered with a
If a user attempts to enter the next address without touching the [Next Address] key, a
Super Fine Half Tone
Ultra Fine
Apply the Resolution Set when Stored
When an image stored by document filing is used, this applies the resolution setting that was stored with the image.
73