Rotation Sending Setting
When transmitting an image that is one of the following sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.)
Printing Page Number at Receiver
When the transmitted image is printed by the receiving machine, the page number can be added to the top of each printed page.
Auto Receive Reduce Setting
When a fax is received that includes printed information such as the sender's name and address, the received image is slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size.
• If Auto Receive Reduce is disabled, the edges of the image outside the standard size will be cut off. However, the image will be clearer because it will be printed at the same size as the original.
•Standard sizes are sizes such as
Duplex Reception Setting
This is used to select whether or not received faxes are printed on both sides of the paper.
When this setting is enabled and a fax consisting of 2 or more pages is received (the pages must be the same size), the pages are printed on both sides of the paper.
Set Address for Data Forwarding
When the machine is unable to print a received fax, the fax can be forwarded to another machine. This setting is used to configure the address of the other machine.
Enter the forwarding address (maximum of 64 characters).
Multiple forwarding addresses cannot be stored.
A3 RX Reduce
When an A3 size fax is received, this function reduces the fax to W letter size.
When this setting is enabled, W letter size faxes are also reduced.
POP3 Communication Timeout Setting
The duration of time the machine waits until stopping reception when a response is not received from the mail server (POP3 server) can be set from 30 to 300 seconds in increments of 30 seconds.
80