Sharp UX-5000 operation manual Checking copy operations in memory, Making Copies

<P=002>

MAKING COPIES

Checking copy operations in memory

You can display the status of copy jobs in memory by following the steps below. You can also cancel copy jobs with this procedure.

Step	Press these keys:		Comments
1	MEM.STATUS	1	Press the MEM. STATUS key (flip up the Rapid
	W		Key overlay if necessary) and the "1" key.
			"COPY STATUS" will appear in the display.

		Press the "#" key or the "*" key to scroll through
		the list of copy jobs. The time the original was
2	or	scanned into memory will appear in the display,
		together with the 3-digit memory number
		assigned to the job. To cancel a copy job, press
		the CLEAR key and then the START key while
		the copy job appears in the display.
STOP		STOP
3		When you have finished checking the list, press
		the STOP key twice to exit.

3-18 BASIC OPERATIONS